Skip to content

Home / Predict / Applications

Predict applications

If it turns, it can tell you it is failing.

The Predict node measures vibration and temperature on rotating machines: motors, pumps, fans, gearboxes, compressors and conveyors. Those machines run every industry, from oil refineries and mines to ships and railways. VibNode is in physical testing now; a long-range version is in development for large, spread-out sites.

Engineering model render · concept design, not a photograph
Where it fits

One node. Almost every industry.

Most unplanned stops start in a bearing, a gearbox, a coupling or a motor. The node watches for the early change, so the repair is planned instead of forced.

Oil & gas

Refineries, terminals and pipelines

Pumps, compressors and fin-fan coolers spread across large plots.

Long rangeHazardous areas
Mining & quarrying

Conveyors, crushers and mills

Kilometres of conveyor and heavy rotating plant far from the control room.

Long rangeHarsh duty
Food & beverage

Processing, packing and cold chain

Mixers, pumps, fans, packing lines and refrigeration compressors.

WashdownCold chain
Logistics

Warehouses, parcel hubs and cold stores

Conveyors, sorters, AMRs, lifts and refrigeration in automated sites.

Peak season
Data centres

Cooling and power plant

Chillers, CRAH fans, cooling towers, pumps and standby generators.

24/7 uptime
Machinery & OEMs

Built into new machines

Machine builders can fit the node at the factory and offer monitoring as a service.

OEM partner
Rail

Depots, stations and tunnels

Ventilation fans, drainage pumps, escalators and depot machinery.

Long rangeWayside first
Ships & offshore

Engine rooms to deck machinery

Pumps, separators, compressors, fans, steering gear and winches.

Hub per zone
Ports & terminals

Cranes, conveyors and reefer plant

Drives and gearboxes on cranes, bulk conveyors and pump houses.

Long range
Water & power

Pumping stations and plants

Remote pumping stations, blowers, cooling fans and auxiliary plant.

Long range
Manufacturing

Pharma, paper, cement, steel

Motors, gearboxes, fans, mixers and process pumps on the line.

Short range
Buildings & airports

HVAC, lifts and baggage handling

Air handlers, pumps, lifts, escalators and baggage conveyors.

Short range
Worked examples

What difference does it make?

Four examples of how an early warning turns a breakdown into a planned job. They are worked examples with stated assumptions, not customer results; we will publish real case studies once pilots are complete.

Worked example · oil refinery

An unspared process pump.

A single centrifugal pump feeds a process unit. A bearing starts to wear. Rolling-bearing faults often show in vibration weeks before they fail.

  • Week 0: Predict learns the normal vibration of the pump.
  • Week 5: Vibration at the drive-end bearing starts to rise; Predict flags the change.
  • Week 6: An engineer reviews the trend and plans a bearing change.
  • Week 8: Bearing replaced in a planned stop, with parts and crew ready.

Worked example with stated assumptions, not a customer result. Real outcomes depend on the machine, the fault and the site.

Without Predict
  • Bearing seizes, damaging the seal and shaft
  • Leak risk and an unplanned unit slowdown
  • Emergency call-out, parts rushed in
  • Example: 24–48 hours to repair
With Predict
  • Bearing changed before it damages the seal
  • Work planned into a normal shift
  • Parts ordered at standard lead time
  • Example: about 8 hours, planned
Worked example · mine

A conveyor drive pulley, 1.5 km from the plant.

An overland conveyor carries ore from the pit to the crusher. A long-range node on the drive pulley bearing reports back to a hub at the transfer house.

  • Day 0: Baseline learned for the pulley bearing and gearbox.
  • Day 20: Temperature and vibration creep up on the pulley bearing.
  • Day 24: Finding reviewed; replacement booked for the weekly shutdown.
  • Day 28: Bearing changed during the planned shutdown.

Worked example with stated assumptions, not a customer result. Real outcomes depend on the machine, the fault and the site.

Without Predict
  • Bearing fails mid-shift; the conveyor and crusher stop
  • Crew and crane mobilised to a remote site
  • Example: a full shift or more of lost production
With Predict
  • No unplanned conveyor stop
  • Repair done in the weekly shutdown
  • Fewer long walks along the belt to inspect
Worked example · ship

A seawater cooling pump, mid-voyage.

An engine-room seawater pump cools the main engine. Its motor bearing starts to wear four days from port.

  • Voyage day 1: Predict flags rising vibration on the motor bearing.
  • Day 2: Chief engineer reviews the trend and switches to the standby pump.
  • Day 2: Spares ordered to the next port.
  • In port: Bearing replaced alongside, no off-hire.

Worked example with stated assumptions, not a customer result. Real outcomes depend on the machine, the fault and the site.

Without Predict
  • Pump fails at sea; reduced speed while the crew repairs it
  • Spares flown out to the next port at high cost
  • Risk to schedule and charter terms
With Predict
  • Standby pump in service before failure
  • Parts waiting at the next port
  • Repair alongside with the right tools
Worked example · parcel hub

A sorter drive during peak season.

A parcel hub runs its sorter 20 hours a day in the weeks before Christmas. One drive gearbox starts to wear.

  • Week 1: Baseline learned on every sorter drive.
  • Week 3: One gearbox shows a rising vibration trend.
  • Week 3: Spare gearbox staged by the sorter.
  • Sunday: Gearbox swapped in the weekly maintenance window.

Worked example with stated assumptions, not a customer result. Real outcomes depend on the machine, the fault and the site.

Without Predict
  • Sorter stops at peak; parcels sorted by hand
  • Missed delivery promises and overtime
  • Example: several hours of lost sortation
With Predict
  • Swap done in the Sunday window
  • No lost peak capacity
  • Evidence to plan spares for next season
In development · VibNode LR

A long-range node for sites measured in kilometres.

We are developing a long-range version of VibNode, designed to reach a hub up to about 2 km away. One hub can then cover a refinery unit, a mine conveyor line, a rail depot or a port berth, without running cables to every machine.

01 · NODE

On the machine

Battery powered, fitted to the motor, pump, fan or gearbox. Measures vibration and temperature.

02 · UP TO ~2 KM

Long-range link

A low-power, long-range radio link from node to hub, designed for about 2 km.

03 · HUB

Site hub

Collects readings from many nodes and sends them on securely over the site network or mobile data.

04 · PREDICT

Planned work

Trends, reviewed findings and work orders in the Predict dashboard.

Status: in development, not yet tested. About 2 km is a design target; real range depends on line of sight, terrain, steel structures and installation, and will be confirmed in field tests before we publish a rating.

Oil & gas

Refineries, terminals and pipelines.

A refinery or terminal has hundreds of rotating machines spread over a large plot, many of them hard to reach on a routine walk. Long-range nodes let one hub cover a whole process unit or tank farm.

Hazardous areas: use in classified zones (ATEX / IECEx) needs a certified version of the node. Our nodes are not certified today; first use would be in safe areas such as utilities, pump houses and terminals.

What to monitor
  • Centrifugal process and transfer pumps
  • Reciprocating and screw compressors
  • Fin-fan air coolers and cooling-tower fans
  • Gearboxes, blowers, mixers and agitators
  • Pipeline pump and compressor stations
  • Loading pumps at jetties and terminals
  • Firewater and seawater lift pumps offshore
Why it matters
  • A failed pump or compressor can shut down a whole unit
  • Fewer manual rounds in hot, high or hazardous areas
  • Early warning on bearings, misalignment and imbalance
  • Evidence to plan repairs into turnarounds
Mining & quarrying

Conveyors, crushers and mills.

Mines run kilometres of conveyor and heavy plant far from the control room. A long-range node on each drive and pulley can report back to a hub at the transfer house or plant.

Underground mines need a version certified for mining hazardous areas (Group I). Surface plant comes first.

What to monitor
  • Conveyor drives, gearboxes, pulleys and idlers
  • Primary and secondary crushers
  • SAG and ball mill gearboxes and pinion bearings
  • Vibrating screens and feeders
  • Slurry and dewatering pumps
  • Ventilation fans and hoists
Why it matters
  • A stopped conveyor or mill stops production
  • Long conveyors are slow and unsafe to inspect on foot
  • Dust, shock and heat shorten bearing life
  • Spares and crews can be ready before the stop
Food & beverage

Processing, packing and the cold chain.

Food and drink plants run fast lines with tight hygiene rules and short shelf lives. A stopped line can mean product thrown away, not just lost hours.

Washdown areas need a suitably sealed housing and food-safe fixing; this is part of our testing plan.

What to monitor
  • Mixers, agitators and homogenisers
  • Product, CIP and transfer pumps
  • Conveyors, fillers and packing-line drives
  • Ovens, fryers and spiral freezer fans and drives
  • Refrigeration compressors, condensers and evaporator fans
  • Compressed-air compressors and vacuum pumps
Why it matters
  • Breakdowns can waste a whole batch of product
  • Cold-chain failures risk stock and food safety
  • Planned work fits around cleaning and production slots
  • Fewer emergency call-outs on night shifts
Logistics

Warehouses, parcel hubs and cold stores.

Logistics is where Sapien Tech started. Automated warehouses and parcel hubs run hundreds of motors and gearboxes, and one failure can stop a whole sort line. Predict is designed to monitor our own automation and the machines already on site.

What to monitor
  • Conveyor and sorter drive units and gearboxes
  • Spiral conveyors, lifts and vertical conveyors
  • AMR, shuttle and crane drive motors
  • Dock levellers and high-speed doors
  • Cold-store refrigeration plant and evaporator fans
  • Air handling and dust extraction fans
Why it matters
  • Peak season leaves no room for breakdowns
  • Delivery promises depend on the sorter
  • A planned swap takes minutes, a breakdown takes hours
  • Links to our maintenance-by-design approach
Data centres

Cooling and power that never stops.

A data centre is only as reliable as its cooling and backup power. Most of that plant is rotating machinery that runs around the clock.

What to monitor
  • Chillers and chiller compressors
  • CRAH and CRAC fans
  • Chilled-water and condenser pumps
  • Cooling towers and dry-cooler fans
  • Standby generators and their auxiliaries
  • Air handling and ventilation fans
Why it matters
  • A cooling failure can force servers to shut down
  • Redundant plant still needs to be ready when called on
  • Evidence for uptime and maintenance reporting
  • Planned work without risking live halls
Machinery & OEMs

Built into new machines.

Machine builders can fit the node at the factory, so every machine leaves with monitoring built in. The OEM can then offer condition monitoring and service plans to its customers.

OEM integration would be agreed per partner, with mounting and data access defined for each machine.

What to monitor
  • Pumps, fans and blowers
  • Gearboxes and geared motors
  • Compressors and vacuum pumps
  • Conveyors and packaging machines
  • Machine tools and spindles
  • Agricultural and construction machinery
Why it matters
  • A new service revenue for the machine builder
  • Faster, better-informed warranty decisions
  • Field data to improve the next design
  • Customers get a machine that warns before it fails
Rail

Depots, stations and tunnels.

Railways depend on machines along the line and in the depot. Long-range nodes suit spread-out wayside assets such as tunnel fans and drainage pumps.

On-train use needs rail qualification (for example EN 50155 and EN 61373). Depots and wayside assets come first.

What to monitor
  • Tunnel and station ventilation fans
  • Drainage and sump pumps
  • Escalator and lift drives
  • Depot wheel lathes, compressors and lifting jacks
  • Points and level-crossing equipment housings (temperature)
  • Later: traction motors, gearboxes and axle bearings on trains
Why it matters
  • Failures in tunnels and stations disrupt service
  • Wayside assets are remote and need possessions to inspect
  • Planned work fits engineering hours
  • Condition data supports safety cases
Ships & offshore

Every important machine on board.

A ship is a floating plant: pumps, compressors, separators and fans run around the clock, far from a repair yard. Nodes can be fitted across the engine room and on deck.

Steel bulkheads block radio, so a ship would use a hub per engine room or deck zone. Marine use would need type approval from a classification society.

What to monitor
  • Cooling-water, fuel, lube-oil and ballast pumps
  • Fuel and lube-oil separators (purifiers)
  • Main and service air compressors
  • Engine-room and accommodation fans
  • Steering gear and shaft-line bearings
  • Thrusters, deck cranes, winches and mooring gear
  • Reefer and provision refrigeration plant
Why it matters
  • A failure at sea is far harder to fix
  • Supports planned maintenance and class surveys
  • Smaller crews cannot check every machine every watch
  • Spares can be ordered before the next port
Ports & terminals

Cranes, conveyors and reefer plant.

Ports combine long distances with heavy rotating plant, a good fit for long-range nodes.

What to monitor
  • Ship-to-shore and yard crane hoist and travel drives
  • Bulk conveyors and stackers
  • Pump houses and fire pumps
  • Reefer and cold-store compressors
Why it matters
  • A crane down holds up a vessel
  • Assets are spread across the quay
  • Wind, salt and dust are hard on bearings
Water & power

Pumping stations and plants.

Utilities run many small sites with few people. Nodes report back so engineers visit the station that needs it.

What to monitor
  • Raw and clean water pumps
  • Wastewater pumps and aeration blowers
  • Cooling fans, feed pumps and auxiliary plant
  • Standby generators
  • Wind turbine auxiliaries (later)
Why it matters
  • Unmanned sites are expensive to visit
  • Pump failures cause flooding and pollution
  • Evidence for regulated maintenance
Manufacturing & process

The machines on the line.

Pharma, paper, cement, steel and automotive plants all depend on the same rotating machines.

What to monitor
  • Motors and gearboxes on production lines
  • Process pumps, mixers and agitators
  • Extraction and combustion fans
  • Kiln, dryer and mill drives
  • Compressed-air compressors
Why it matters
  • One stopped line stops shipments
  • Planned stops cost far less than breakdowns
  • Energy waste from worn machines
Buildings & airports

Keeping buildings running.

Hospitals, airports, shopping centres and offices rely on plant that nobody sees until it fails.

What to monitor
  • Air handling units and supply fans
  • Chilled-water and heating pumps
  • Lifts and escalators
  • Standby generators
  • Baggage-handling conveyors at airports
Why it matters
  • Plant rooms are rarely inspected
  • A failed lift or air handler affects everyone
  • Planned work avoids out-of-hours call-outs
Where we are

Honest status.

VibNode is in physical testing. VibNode LR, the long-range version, is in development. Every other application on this page is a target market, not a finished product. Certified versions for hazardous areas, rail and marine would follow testing and the relevant approvals.